Tutorial videos
The video tutorials of assembly/disassembly and adjustments are intended for use by professional mechanics.
Those not professionally qualified to assemble bicycles must not attempt to fit or operate on the components due to the risk of performing incorrect operations that could cause malfunction of the components and the resulting risk of accidents or physical injuries.
Installing the Ekar 13S disc brake hydraulic system
Find out how to install the Ekar disc brake hydraulic system
Installation of the disc brake hydraulic system with oil in the components
Discover how to install the disc brake hydraulic system with the components already full of oil
Installing the V4 EPS12s internal interface in the handlebar
Installing the V4 EPS 12s internal interface in the frame
Campagnolo EPS 12s groupsets: riding setting and single sprocket
Campagnolo EPS 12s groupsets: zero setting
Discover how to reset the rear derailleur and the front derailleur of the Campagnolo EPS 12s electronic groupset
Installation of 12-speed Campagnolo mechanical groupsets
Mechanical groupset mounting instructions: Super Record 12V and Record 12V
Adjusting the position of the hydraulic disc brake lever
Discover how to adjust: the free stroke (only up to 2020 range), the position of the brake lever and the external lever that controls the rear derailleur/front derailleur for mechanical Ergopower systems
Complete breakdown of the components of the hydraulic disk brake control
Discover how to disassemble and reassemble the parts of a hydraulic disc brake command: brake lever, hydraulic hose and master cylinder
Filling and bleeding the disc brake hydraulic system
Discover how to fill and bleed the oil after installing the disc brake hydraulic system