F.A.Q.

Campagnolo products maintenance info (14)

No, the EPS drivetrain is only designed for use with double cranksets.

No, the EPS drivetrain is only designed for use with 11 speed and 12 speed components.

Campagnolo electronic groupsets represent the pinnacle of currently available cycling technology. In this section you will find more detailed information on the Campagnolo electronic groupset world.

The pulses from the controls are received by the rear derailleur that, depending on the request, activates the rear derailleur or the front derailleur.

Charge the front and rear derailleur batteries and turn on the controls

Use a 3-4 mm tip to quickly press the ON/OFF button area (below the MODE button): the LED turns on green and then flashes blue. If the controls were previously coupled with the rear derailleur, when the LED turns off this means they are coupled with the rear derailleur. When an operating lever is pressed, the led turns on blue

Use a 3-4 mm tip to press the ON/OFF button area for at least 3 seconds (below the MODE button) until the red LED turns on for 3 s

While the controls have an ON button, the rear and front derailleur do not have ON buttons and are turned on when the battery is inserted or, if the battery is already inserted, if subjected to a vibration.

No, after 30 minutes, the components go into stand-by automatically and the rear and front derailleur leds turn off

When starting to pedal, thanks to the movement sensors located in each component, all components activate and are ready to function after a few seconds

F.A.Q.

Here you can find the answers to the frequently asked questions