F.A.Q.

Campagnolo products maintenance info (14)

The support cover probably still has the tooth for coupling with the previous master cylinder: you can remove it with a cutter.

No, it’s not necessary.

While on Super Record and Record 2018-2020 groupsets it is possible to adjust the free stroke to S (short) or L (long); on the master cylinder 2021 this adjustment is not possible.

No, it’s not necessary.

It is a fundamental aspect for the proper operation of the crankset and in order to avoid damage and hazardous situations. The use of a torque wrench is necessary when tightening to torque. An inadequate installation can void the warranty in the case of damage to the crankset or its parts.

Specific PRO-TECH type cups have to be used for each bottom bracket.

Of course, I can remove the chainring only. See the crankset User Manual for full details.

I use a 2.5 mm Allen wrench in the front hole of the lever. For correct rear derailleur operation, I also adjust the position of the outer derailleur lever.

I only have to check the length if I introduce a difference of more than 4 teeth overall (calculated considering the chainring and the biggest sprocket) compared to the previous configuration.

This is not possible with Campagnolo wheels.

F.A.Q.

Here you can find the answers to the frequently asked questions