F.A.Q.

Campagnolo products maintenance info (14)

When transporting the bicycle, leave the batteries for the rear and front derailleur installed to protect the cavities and electrical contacts inside them from bad weather. Although the leds of the rear and front derailleur turn on, if the control levers are not activated, the components go into stand-by and the leds turn off after 30 minutes.

Transport it as it if were exposed to bad weather, making sure that the operating levers cannot be actuated. Otherwise, remove the rear and front derailleur batteries and turn off the controls, as they would otherwise continue to search for the rear and front derailleur and the LED would flash continuously.

No, the operation of the LEDs cannot be changed

Yes, the lever functions can be customised using the dedicated app

When connecting to the groupset with the MyCampy 3.0 app, any new firmware that is available for updating the single component is displayed

No, the groupset was created exclusively for the road and not for gravel use

Yes, it is possible for there to be temporary disturbances to groupset operation near high intensity electromagnetic sources

The batteries of the rear and front derailleur are lithium ion batteries, and are dedicated and specific to the rear derailleur and to the front derailleur and are not interchangeable.

The type of batteries for the controls are CR-2032

Quickly press the MODE button and observe how many LEDs turn on: each LED indicates a 25% battery charge. The state of charge can also be checked using the dedicated app

F.A.Q.

Here you can find the answers to the frequently asked questions