Documentation

The Technical Manuals are intended for use by professional mechanics. Those not professionally qualified to assemble bicycles must not attempt to fit or operate on the components due to the risk of performing incorrect operations that could cause malfunction of the components and the resulting risk of accidents or physical injuries.

Documentation
Documentation
Limited conventional warranty
Spacers of XDR V2 fw body (30 mm d.) by Sram Corp.

Instructions on the correct spacer to be placed on the outer side of the XDR V2 body (outer bearing fully recessed in the body)

Spacers of XDR V2 fw body (30 mm d.) by Sram Corp.

Instructions on the correct spacer to be placed on the outer side of the XDR V2 body (outer bearing fully recessed in the body)

Wheel centering

Wheel centering: lateral/radial truing and hub alignement

N3W retrofit kit (cup-cone bearings)

Instructions for the installation of the N3W retrofit kit

Replacement of free wheel body pawls

Instructions for the replacement free wheel body ratchets

Removal and refitting body free wheel

Instructions for the removal and refitting body free wheel

Removal and refitting wheel front hub (cup-cone bearings)

Instructions for the removal and refitting front hub wheel

Wheel centering

Wheel centering: lateral/radial truing and hub alignement

Replacement of the spoke with Momag system - open spoke seat on the hub

Replacement of a wheel spoke with a rim not drilled (MoMag system) and with the head seat open on the hub

1 / 203