Select language
  • Italiano
  • English
  • Deutsch
  • Español
  • Français
Your shopping cart is empty
close

Support

Info sugli impianti idraulici freno a disco

The support cover probably still has the tooth for coupling with the previous master cylinder: you can remove it with a cutter.
No, the intercompatibility tests for the two oils and all hydraulic system components were carried out only for these two types of oil.
No, the pads with spring code DB-310 must be used with the new calipers.
Yes, the 2018-2020 calipers are compatible with the new systems.
We recommend keeping the oil already in the hydraulic system. It does remain possible if required, however, to remove the blue oil in the system and add the red mineral oil, seeking to limit mixing as much as possible to keep the oil transparent and make identifying air bubbles in the oil easier. The two oils and additives present are not in any case incompatible with one another.
The front adapter, which is always necessary for both 140 and 160 mm discs, and the rear adapter if a 160 mm disc is to be fitted at the rear
While on Super Record and Record 2018-2020 groupsets it is possible to adjust the free stroke to S (short) or L (long); on the master cylinder 2021 this adjustment is not possible.
From February 2021, all hydraulic systems contain Campagnolo red mineral oil. For previous systems and details, see the Technical Specifications table in the Technical Manual
Shop
Find the store nearest to you
E-store
Subscribe and get 10% discount
Free shipping on orders over € 100,00
Subscribe now
This site uses cookies to provide the best possible browsing experience as well as for business and advertising purposes. If you continue to browse the site without disabling them, you authorise us to use cookies on your device. To read our policy on cookies click here.